Optimize web fonts for Core Web Vitals.
This article discusses performance best practices for fonts. There are a variety of ways in which web fonts impact performance:
- Delayed text rendering: If a web font has not loaded, browsers typically delay text rendering. In many situations, this delays First Contentful Paint (FCP). In some situations, this delays Largest Contentful Paint (LCP).
- Layout shifts: The practice of font swapping has the potential to cause layout shifts and so impact Cumulative Layout Shift (CLS). These layout shifts occur when a web font and its fallback font take up different amounts of space on the page.
This article is broken down into three sections: font loading, font delivery, and font rendering. Each section explains how that particular aspect of the font lifecycle works and provides corresponding best practices.
Font loading
Fonts are typically important resources, as without them the user might be unable to view page content. Thus, best practices for font loading generally focus on making sure that fonts get loaded as early as possible. Particular care should be given to fonts loaded from third-party sites as downloading these font files requires separate connection setups.
If you're unsure if your page's fonts are being requested in time, check the Timing tab within the Network panel in Chrome DevTools for more information.
Understanding @font-face
Before diving into best practices for font loading it's important to understand how @font-face
works and how this impacts font loading.
The @font-face
declaration is an essential part of working with any web font. At a minimum, it declares the name that will be used to refer to the font and indicates the location of the corresponding font file.
@font-face {
font-family: "Open Sans";
src: url("/fonts/OpenSans-Regular-webfont.woff2") format("woff2");
}
A common misconception is that a font is requested when a @font-face
declaration is encountered—this is not true. By itself, @font-face
declaration does not trigger font download. Rather, a font is downloaded only if it is referenced by styling that is used on the page. For example, like this:
@font-face {
font-family: "Open Sans";
src: url("/fonts/OpenSans-Regular-webfont.woff2") format("woff2");
}
h1 {
font-family: "Open Sans"
}
In other words, in the example above, Open Sans
would only be downloaded if the page contained a <h1>
element.
Thus, when thinking about font optimization, it's important to give stylesheets just as much consideration as the font files themselves. Changing the contents or delivery of stylesheets can have a significant impact on when fonts arrive. Similarly, removing unused CSS and splitting stylesheets can reduce the number of fonts loaded by a page.
Inline font declarations
Most sites would strongly benefit from inlining font declarations and other critical styling in the <head>
of the main document rather than including them in an external stylesheet. This allows the browser to discover the font declarations sooner as the browser doesn't need to wait for the external stylesheet to download.
<head>
<style>
@font-face {
font-family: "Open Sans";
src: url("/fonts/OpenSans-Regular-webfont.woff2") format("woff2");
}
body {
font-family: "Open Sans";
}
...etc.
</style>
</head>
Inlining critical CSS can be a more advanced technique that not all sites will be able to achieve. The performance benefits are clear, but it requires additional processes and build tools to ensure the necessarily CSS—and ideally only the critical CSS—is inlined correctly and that any additional CSS is delivered in a non-render blocking fashion.
Preconnect to critical third-party origins
If your site loads fonts from a third-party site, it is highly recommended that you use the preconnect
resource hint to establish early connection(s) with the third-party origin. Resource hints should be placed in the <head>
of the document. The resource hint below sets up a connection for loading the font stylesheet.
<head>
<link rel="preconnect" href="https://fonts.com">
</head>
To preconnect the connection that is used to download the font file, add a separate preconnect
resource hint that uses the crossorigin
attribute. Unlike stylesheets, font files must be sent over a CORS connection.
<head>
<link rel="preconnect" href="https://fonts.com">
<link rel="preconnect" href="https://fonts.com" crossorigin>
</head>
When using the preconnect
resource hint, keep in mind that a font provider may serve stylesheets and fonts from separate origins. For example, this is how the preconnect
resource hint would be used for Google Fonts.
<head>
<link rel="preconnect" href="https://fonts.googleapis.com">
<link rel="preconnect" href="https://fonts.gstatic.com" crossorigin>
</head>
Be cautious when using preload
to load fonts
Although preload
is highly effective at making fonts discoverable early in the page load process, this comes at the cost of taking away browser resources from the loading of other resources.
Inlining font declarations and adjusting stylesheets may be a more effective approach. These adjustments come closer to addressing the root cause of late-discovered fonts—rather than just providing a workaround.
In addition, using preload
as a font-loading strategy should also be used carefully as it bypasses some of the browser's built-in content negotiation strategies. For example, preload
ignores unicode-range
declarations, and if used prudently, should only be used to load a single font format.
However, when using external stylesheets, preloading the most important fonts can be very effective since the browser won't otherwise discover whether the font is needed until much later.
Font delivery
Faster font delivery yields faster text rendering. In addition, if a font is delivered early enough, this can help eliminate layout shifts resulting from font swapping.
Using self-hosted fonts
On paper, using a self-hosted font should deliver better performance as it eliminates a third-party connection setup. However, in practice, the performance differences between these two options is less clear cut: for example, the Web Almanac found that sites using third-party fonts had a faster render than fonts that used first-party fonts.
If you are considering using self-hosted fonts, confirm that your site is using a Content Delivery Network (CDN) and HTTP/2. Without use of these technologies, it is much less likely that self-hosted fonts will deliver better performance. For more information, see Content Delivery Networks.
If you use a self-hosted font, it is recommended that you also apply some of the font file optimizations that third-party font providers typically provide automatically—for example, font subsetting and WOFF2 compression. The amount of effort required to apply these optimizations will depend somewhat on the languages that your site supports. In particular, be aware that optimizing fonts for CJK languages can be particularly challenging.
Use WOFF2
Of the modern font fonts, WOFF2 is the newest, has the widest browser support, and offers the best compression. Because it uses Brotli, WOFF2 compresses 30% better than WOFF, leading to less data to download and therefore faster performance.
Given the browser support, experts now recommend only using WOFF2:
In fact, we think it is also time to proclaim: Use only WOFF2 and forget about everything else.
Bram Stein, from the 2022 Web Almanac
This will simplify your CSS and workflow massively and also prevents any accidental double or incorrect font downloads. WOFF2 is now supported everywhere. So, unless you need to support really ancient browsers, just use WOFF2. If you can't, consider not serving any web fonts to those older browsers at all. This won't be a problem if you have a robust fallback strategy in place. Visitors on older browsers will simply see your fallback fonts.
Subset fonts
Font files typically include a large number of glyphs for all the various characters they support. But you may not need all the characters on your page and can reduce the size of font files by subsetting fonts.
The unicode-range
descriptor in the @font-face
declaration informs the browser which characters a font can be used for.
@font-face {
font-family: "Open Sans";
src: url("/fonts/OpenSans-Regular-webfont.woff2") format("woff2");
unicode-range: U+0025-00FF;
}
A font file will be downloaded if the page contains one or more characters matching the unicode range. unicode-range
is commonly used to serve different font files depending on the language used by page content.
unicode-range
is often used in conjunction with the technique of subsetting. A subset font includes a smaller portion of the glyphs that were contained in the original font file. For example, rather than serve all characters to all users, a site might generate separate subset fonts for Latin and Cyrillic characters. The number of glyphs per font varies wildly: Latin fonts are usually on the magnitude of 100 to 1000 glyphs per font; CJK fonts may have over 10,000 characters. Removing unused glyphs can significantly reduce the filesize of a font.
Some font providers may provide different versions of fonts files with different subsets automatically. For example, Google Fonts does this by default:
/* devanagari */
@font-face {
font-family: 'Poppins';
font-style: normal;
font-weight: 400;
font-display: swap;
src: url(https://fonts.gstatic.com/s/poppins/v20/pxiEyp8kv8JHgFVrJJbecnFHGPezSQ.woff2) format('woff2');
unicode-range: U+0900-097F, U+1CD0-1CF6, U+1CF8-1CF9, U+200C-200D, U+20A8, U+20B9, U+25CC, U+A830-A839, U+A8E0-A8FB;
}
/* latin-ext */
@font-face {
font-family: 'Poppins';
font-style: normal;
font-weight: 400;
font-display: swap;
src: url(https://fonts.gstatic.com/s/poppins/v20/pxiEyp8kv8JHgFVrJJnecnFHGPezSQ.woff2) format('woff2');
unicode-range: U+0100-024F, U+0259, U+1E00-1EFF, U+2020, U+20A0-20AB, U+20AD-20CF, U+2113, U+2C60-2C7F, U+A720-A7FF;
}
/* latin */
@font-face {
font-family: 'Poppins';
font-style: normal;
font-weight: 400;
font-display: swap;
src: url(https://fonts.gstatic.com/s/poppins/v20/pxiEyp8kv8JHgFVrJJfecnFHGPc.woff2) format('woff2');
unicode-range: U+0000-00FF, U+0131, U+0152-0153, U+02BB-02BC, U+02C6, U+02DA, U+02DC, U+2000-206F, U+2074, U+20AC, U+2122, U+2191, U+2193, U+2212, U+2215, U+FEFF, U+FFFD;
}
When moving to self-hosting, this is an optimization that can easily be missed and lead to larger font files locally.
It is also possible to manually subset fonts if your font provider allows this, either through an API (Google Fonts supports this by providing a text
parameter), or by manually editing the font files and then self-hosting. Tools for generating font subsets include subfont and glyphanger. However, do check the licence for the fonts you use allow subsetting and self-hosting.
Use fewer web fonts
The fastest font to deliver is a font that isn't requested in the first place. System fonts and variable fonts are two ways to potentially reduce the number of web fonts used on your site.
A system font is the default font used by the user interface of a user's device. System fonts typically vary by operating system and version. Because the font is already installed, the font does not need to be downloaded. System fonts can work particularly well for body text.
To use the system font in your CSS, list system-ui
as the font-family:
font-family: system-ui
The idea behind variable fonts is that a single variable font can be used as a replacement for multiple font files. Variable fonts work by defining a "default" font style and providing "axes" for manipulating the font. For example, a variable font with a Weight
axis could be used to implement lettering that would previously require separate fonts for light, regular, bold, and extra bold.
Not everyone will benefit from switching to variable fonts. Variable fonts contain many styles, so typically have larger file sizes than individual non-variable fonts that only contain one style. Sites that will see the largest improvement from using variable fonts are those that use (and need to use) a variety of font styles and weights.
Font rendering
When faced with a web font that has not yet loaded, the browser is faced with a dilemma: should it hold off on rendering text until the web font has arrived? Or should it render the text in a fallback font until the web font arrives?
Different browsers handle this scenario differently. By default, Chromium-based and Firefox browsers will block text rendering for up to 3 seconds if the associated web font has not loaded; Safari will block text rendering indefinitely.
This behavior can be configured by using the font-display
attribute. This choice can have significant implications: font-display
has the potential to impact LCP, FCP, and layout stability.
Choose an appropriate font-display
strategy
font-display
informs the browser how it should proceed with text rendering when the associated web font has not loaded. It is defined per font-face.
@font-face {
font-family: Roboto, Sans-Serif
src: url(/fonts/roboto.woff) format('woff'),
font-display: swap;
}
There are five possible values for font-display
:
Value | Block period | Swap period |
---|---|---|
Auto | Varies by browser | Varies by browser |
Block | 2-3 seconds | Infinite |
Swap | 0ms | Infinite |
Fallback | 100ms | 3 seconds |
Optional | 100ms | None |
- Block period: The block period begins when the browser requests a web font. During the block period, if the web font is not available, the font is rendered in an invisible fallback font and thus the text will not be visible to the user. If the font is not available at the end of the block period, it will be rendered in the fallback font.
- Swap period: The swap period comes after the block period. If the web font becomes available during the swap period, it will be "swapped" in.
font-display
strategies reflect different viewpoints about the tradeoff between performance and aesthetics. As such it's difficult to give a recommended approach as it does depend on individual preferences, how important the web font is to the page and brand, and how jarring a late-arriving font can be when swapped in.
For most sites, these are the three strategies that will be most applicable:
If performance is a top priority: Use
font-display: optional
. This is the most "performant" approach: text render is delayed for no longer than 100ms and there is assurance that there will be no font-swap related layout shifts. However, the downside here is the web font won't be used if it arrives late.If displaying text quickly is a top priority, but you want to still ensure the web-font is used: Use
font-display: swap
but make sure to deliver the font early enough that it does not cause a layout shift. The downside of this option is the jarring shift when the font arrives late.If ensuring text is displayed in a web font is a top priority: Use
font-display: block
but make sure to deliver the font early enough that it minimises the delay of the text. The downside of this is the initial text display will be delayed. Note despite this deplay, it can still cause a layout shift as the text is actually drawn invisible, and the fallback font space is therefore used to reserve the space. Once the web font loads, this may require difference space and hence a shift. This may, however, be a less jarring shift thanfont-display: swap
as the text itself won't be seen to shift.
Also keep in mind that these two approaches can be combined: for example, use font-display: swap
for branding and other visually distinctive page elements; use font-display: optional
for fonts used in body text.
Reduce the shift between your fallback font and your webfont
To reduce the CLS impact, you can use the new size-adjust
attributes. For more information see the article on CSS size-adjust
. This is a very new addition to our toolset, so is more advanced and a bit manual at present. But definitely one to experiment with and watch for tooling improvements in the future!
Conclusion
Web fonts still be a performance bottleneck but we have an ever-growing range of options to allow us to optimize them to reduce this bottleneck as much as possible.